Sharp, hand-held tools are frequently used in the workplace. The tools range from scissors, razors, saws, and knives to pruners, chisels, and snips. While these tools are very different and can be used for a wide variety of jobs, they have some common hazards and safety precautions. Horseplay should be forbidden around sharp tools.

Sharp tools can cause cuts and puncture wounds, if they’re not handled properly. Workers should be trained in the tool manufacturer’s directions for proper use, including how to inspect, maintain, and sharpen the tool. For some tools, workers must wear personal protective equipment such as safety glasses and well-fitting gloves.

In order to choose the right tool for the job, workers should consider not only the job task but the type, hardness, and size of the material on which they’ll be working. Substituting the wrong tool for the job can lead to an accident or injury. Workers should use only quality tools that are sharp and in good condition. If a tool is broken, dull, or damaged, it should be tagged as such and taken out of service.

The most important rule to remember about using sharp tools is to always cut away from the body and face. When cutting with one hand, workers should know where their other hand is. If a sharp tool is dropped, workers should be taught not to try to catch it but allow it to fall, making sure that their legs and feet are out of the way.

The safe way to work with a sharp tool is to concentrate on the task at hand, making straight, even cuts without rocking, prying, or twisting the tool. Hammering or applying excessive force or pressure to sharp tools can cause them to slip. Keep in mind, that some materials or outdoor conditions can also make tools slippery.

Workers need to be careful when transporting and storing sharp tools. Workers should be instructed not to carry a sharp tool in their pocket; to use a sheath, belt, or apron; and when there is a pause in work, to hold the tool at their side but a safe distance from their body. When walking with a sharp tool, the tool should be carried with the blade down and away from the body. When climbing with a sharp tool, tool belts, or buckets with hand lines should be used so workers can have both hands to grip the ladder. When passing a sharp to another worker, tools should be passed with the hand first and the blade down; they should never be tossed from one worker to another.

When not in use, sharp tools should be stored in a sturdy tool box or on a tool rack with the sharp edges suitably covered. Otherwise, they should be placed near the back of work benches to keep handles or blades from extending over the edge.

Safety training sign-in sheet

Questions, Comments or Suggestions?

Send us your comments using the form below. To receive a response, please provide your email.

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for medical advice or legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

External Link iconIndicates you are leaving Safe At Work California