Corrosives are materials so powerful that they can damage or destroy metal. In humans, they can attack and chemically destroy body tissues as soon as the chemicals touch the skin, eyes, or lungs. Although corrosives can be dangerous, they need not be harmful if they are handled, stored, and disposed of safely. Everyone who works with corrosives should be aware of their potential hazards and follow all safety precautions and recommended handling and storage procedures.
Corrosive materials are present in almost any workplace either by themselves or contained in other products. Common acid corrosives include hydrochloric acid, sulfuric acid, acetic acid, and nitric acid. Common alkaline/bases include ammonium hydroxide, potassium hydroxide, and sodium hydroxide (caustic soda). Cement contains lime, which is a base or caustic compound. Cleaning compounds may contain acids or bases. Before using a material, always read the Safety Data Sheet (SDS) to know what is in the material and to learn how to use it safely.
Corrosives can burn and destroy body tissues on contact. The stronger or more concentrated the corrosive material is and the longer it touches the body, the worse the injuries will be. Some corrosives are toxic and can cause other health effects. Check the SDS and the label on the container for warnings of possible health effects.
Following these basic safe work practices will help protect you and your coworkers from the hazards of corrosive materials:
- Obtain and read the SDS for all of the materials you work with.
- Be aware of all of the hazards (fire, health, reactivity) of the materials you work with.
- Know which of the materials you work with are corrosives.
- Wear the proper personal protective equipment when working with corrosive materials.
- Store corrosives in suitable containers away from incompatible materials.
- Store, handle, and use corrosives in well-ventilated areas.
- Handle containers safely to avoid damaging them.
- Dispense corrosives carefully and keep containers closed when not in use.
- Stir corrosives slowly and carefully into cold water when the job requires mixing corrosives and water. (Rule to remember: AAA – Always Add Acids to water – this also applies to bases).
- Handle and dispose of corrosive wastes safely.
- Practice good housekeeping, personal cleanliness, and equipment maintenance.
- Know how to handle emergencies (spills, fires, injuries) involving corrosive materials.
- Always follow the health and safety rules that apply to you job.
If you should get corrosive material on you, remove any contaminated clothing, rinse yourself off immediately, and seek medical attention.
Questions, Comments or Suggestions?
Send us your comments using the form below. To receive a response, please provide your email.
The above evaluations and/or recommendations are for general guidance only and should not be relied upon for medical advice or legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.
Indicates you are leaving Safe At Work California